MICRO DRILL BATTERY POWERED 18000-17

For those situations where conventional mains-powered drills can't be used or prove to be cumbersome, FST offers its portable, rechargeable, high-speed micro-drill. Powered by a 7 volt nickel-cadmium rechargeable battery this drill operates at approximately 11,000 RPM, is quiet running and vibration free. It is provided with its own recharging unit for overnight charging. The drill cannot be overcharged and can be powered by the recharger if the battery is too low. A sensitive switch allows precise fingertip control of drilling. The drill will hold all standard bits and reamers.… Drill cannot be autoclaved.

Cat. Code 18000-17

FLEX-SHAFT DRILL (picture at left)

Flexible shaft Drills allow easy and precise control of the hand-piece by separating it from the mass and vibration of the motor. The pencil thin light weight, hand-piece features sealed, permanently lubricated ball bearings for long life, low maintenance and quiet operation.

This series of Drills can support large probe holders (ordered separately) suitable for mounting them on the most common stereotaxic instruments. Foot pedal for variable speed control.

Cat. 1600 Flex-Shaft Drill

DRILL BITS (burrs)

suitable for all the Drill Units showed in this page

- Code 19007-05 Pkg. of 10 bits 0,5 mm diam.

- Code 19007-07 Pkg. of 10 bits 0,7 mm diam.

- Code 19007-09 Pkg. of 10 bits 0,9 mm diam.

- Code 19007-14 Pkg. of 10 bits 1,4 mm diam.

TREPHINE BURRS (empty inside - sold single)

also available with diam. 1,8 – 2,3 – 2,7 and 5 mm

Precise Surgery Micro-drill

Precise DC Micro-Drill, very quite, high speed side switch adjustable, ideal for brain micro-surgery operations. The light hand-piece ensures precise control even at the max. speed which can reach 27.000 RPM.

Cat. Code 2BDC (up to 27000 RPM, side rheostat )

HI TECH Surgery Micro-drill

High Tech DC Micro-Drill, very quite, high speed pedal switch adjustable, ideal for brain micro-surgery operations. The light hand-piece ensures precise control even at the max. speed which can reach 40.000 RPM.

Cat. Code 2BDCHI (up to 40000 RPM, foot switch)

Drills Model 2BDC and 2BDCHI are supplied with the NEW mandrel with DC motor incorporated inside. (picture at right).

The DC brushless motor avoids any electrical noise which may interfere with ECG or EEG measurements. Its light weight and vibration free technology ensures precise surgery operation. Automatic clamp for secure locking of any type of Drill Bits.

Large Probe adaptor for mounting on STEREOTAXIC Units available

PE Tubing PE 10 0,28 x 0,61 mm. 30 Gauge PE 20 0,38 x 1,09 mm. 27, 26 Gauge PE 50 0,58 x 0,965 mm. 23 Gauge PE 60 0,76 x 1,22 mm. 21 Gauge PE 90 0,86 x 1,27 mm. 20 Gauge PE 100 0,86 x 1,52 mm. 20 Gauge PE 200 1,40 x 1,90 mm. 17 Gauge Any other size available
Silastic Tubing
SFM3-1050 0,30 mm x 0,63 mm SFM3-1350 0,50 mm x 0,93 mm SFM3-1550 0,63 mm x 1,19 mm SFM3-1750 0,76 mm x 1,65 mm SFM3-1850 0,78 mm x 3,96 mm		SFM3-2050 1,01 mm x 2,15 mm SFM3-2350 1,47 mm x 1,95 mm SFM3-2650 1,57 mm x 2,41 mm SFM3-3050 1,98 mm x 3,17 mm SFM3-3250 2,64 mm x 4,87 mm

	Catheters for Laboratory Animals Instech Solomon offers a full range of silicone, polyurethane and heparin-coated polyurethane catheters in sizes for nearly all laboratory animal species -- from mice and rats to dogs, non-human primates and other large animals. With more than 20 years of experience designing and manufacturing laboratory animal catheters, Instech Solomon personnel can help you choose the ideal catheter for your application.
Model	Name
CBAS-C30	CBAS™ heparin-coated PU catheter 3Fr
CBAS-C35	CBAS™ heparin-coated PU catheter 3.5Fr
CBAS-C50	CBAS™ heparin-coated PU catheter 5Fr
CBAS-C70	CBAS™ heparin-coated PU catheter 7Fr
PU-C20	Uncoated PU catheter (2Fr, no luer, bevel tip)
PU-C30	Uncoated PU catheter (3Fr, no luer)
PU-C35	Uncoated PU catheter (3.5Fr, no luer)
PU-C50	Uncoated PU catheter (5Fr, no luer)
PU-C70	Uncoated PU catheter (7Fr, no luer)
SIL-C20	Silicone catheter (2Fr, no luer, clear, round tip)
SIL-C30	Silicone catheter (3Fr, no luer, clear, round tip)
SIL-C35	Silicone catheter (3.5Fr, female luer, clear, round tip)
SIL-C50	Silicone catheter (5Fr, female luer, clear, round tip)
SIL-C70	Silicone catheter (7Fr, female luer, clear, round tip)

A wide range of Catheters are available

32g Mouse Catheter System (picture at right) This catheter system offers the smallest diameter catheter/stylet product available for murine procedures

- PTFE Heat Shrink Tubing

- PTFE Sub-Lite Wall Tubing

- Plugs, Needles, Guide Wires

- Micro-Renathane®

- Tubing MRE-010

- RenaSil™

- Silicone Tubing

- RenaPulse™ Tubing

- Intrathecal Catheters

- Intercranial Catheters

- Thoracic Jugular Vein & Thoracic Carotid Artery Catheters

- Femoral Vein & Femoral Artery Catheters

Laboratory Supplies

Mohr Tubing Occluders

Code 5710-45 Length 50 mm

Code 5710-49 Length 60 mm

Code 5710-51 Length 70 mm

Code 5710-53 Length 80 mm

Hoffamn Flow tubing Regulators

Code 5620-19 12 mm wide

Code 5620-24 17 mm wide

Code 5620-27 20 mm wide

Code 5620-32 25 mm wide

Code 5620-38 30 mm wide

Code 5620-41 40 mm wide

One Way Stopcocks

Code 0374-00 Ext. Diam. 8 mm

Code 0371-00 Ext. Diam. 10 mm

Code 0376-00 Ext. Diam. 13 mm

Code 0379-00 Ext. Diam. 15 mm

DI KECK stopcocks

Code 5660-10 Tubinh 4 mm

Code 5660-12 Tubinh 6 mm

Code 5660-17 Tubinh 10 mm

Code 5660-21 Tubinh 14 mm

Bicone Tube Adaptors

Code 0510-00 Tube 4-5-6 mm

Code 0511-00 Tube 6-7-8 mm

Code 0510-12

Tube diam. 8-9-10 mm

Code 0510-13

Tube diam. 10-11-12 mm

2 Size Bicone

Code 0877-00 Side A Tube 4-6-8 mm. Side B 10-12 mm

Code 0878-00 Side A Tube 4-6-8 mm. Side B 12-14-16 mm

Code 0879-00 Side A Tube 8-10-12 mm. Side B 14-16 mm

Tubing 4 way junction

Code 1410-00 Ext. Diam. 3,5

Code 1411-00 Ext. Dia. 6 mm

Code 1412-00 Ext. Dia. 8 mm

Code 1413-00 Ext. D. 10 mm

Tubing Y junction

Code 0464-00 Ext. Dia. 4 mm

Code 0465-00 Ext. Dia. 6 mm

Code 0466-00 Ext. Dia. 8 mm

Code 0467-00 Ext. D. 10 mm

20 meter Coil PVC Tubing

Code 2600-09 Int. Diam. 3 x Ext. 5 mm

Code 2600-10 Int. Diam. 4 x Ext. 6 mm

Code 2600-12 Int. Diam. 6 x Ext. 9 mm

Code 2600-15 Int. Diam. 8 x Ext. 12 mm

Code 2600-17 Int. Diam. 10 x Ext. 14 mm

Code 2600-19 Int. Diam. 12 x Ext. 17 mm

20 meter Coil Silicon Tubing

Code 2950-05 Int. Diam. 1 x Ext. 3 mm

Code 2950-07 Int. Diam. 2 x Ext. 4 mm

Code 2960-10 Int. Diam. 4 x Ext. 6 mm

Code 2970-12 Int. Diam. 6 x Ext. 9 mm

Code 2980-13 Int. Diam. 7 x Ext. 11 mm

Code 2985-15 Int. Diam. 8 x Ext. 12 mm

Adjustable Clamps

Code 5990-17 Adjustable Clamp, diameter min. 10 mm. Diameter max. 20 mm

Code 5990-32 Adjustable Clamp, diameter min. 30 mm. Diameter max. 50 mm

Code 5990-44 Adjustable Clamp, diameter min. 50 mm. Diameter max. 80 mm

Code 5880-57 Adjustable Clamp, diameter min. 50 mm. Diameter max. 100 mm

MIcrometric Positioner

This is used for the precise horizontal or vertical positioning of transducers, electrodes, clamps, rods, lights, etc. Movement is over 50 mm and it is graduated by 1 mm increments.

532082W Micrometric Positioner

Two side Holder

This two side 90° Holder is use to lock clamps or to support transducers on rods and stands.

Code 5300-20 Rod 13 mm max

Code 5300-23 Rod 16 mm max

Code 5300-28 Rod 21 mm max

Stands

Code 6620-05

Base 18 x 36 cm Rod (centre)H60 cm

Code 4070-79

Base 16 x 25 cm Rod (side) H50 cm

Code 4070-79

Base 13 x 20 cm Rod (side) H60 cm

Code 4070-79

Base 20 x 31 cm Rod (side) H80 cm

Tripod Stands

Code 6900-59

Base diam. 20 cm Rod H50 cm

Code 6900-65

Base diam. 28 cm Rod H60 cm

Code 6900-68

Base diam. 35 cm Rod H80 cm

Reservoirs with Stopcock

Code 1660-00 Capacity 5 liters

Code 1662-00 Capacity 10 liters

Code 1664-00 Capacity 25 liters

Code 1666-00 Capacity 50 liters

Timers

Code 1105-00 Analogic Timer

0-60 min. 0-60 seconds, resolution 1/10 sec. (picture above)

Code 1095-00 Electronic Timer

999 Minutes, Resolution 1/10 sec.

Countdown function

ADJUSTABLE HEIGHT SUPPORT

Elevating Table adjustable in height

Made of 18/8 stainless steel. With robust base supplied with four nonslip feet.

Code 8510.51 Plate 13x16 cm High adjustable 60 - 245 mm max. weight 15 Kg

Code 8510.52 Plate 20x20 cm High adjustable 65 - 300 mm max. weight 30 Kg

Code 8510.53 Plate 30x30 cm High adjustable 80 - 450 mm max. weight 50 Kg

PARAFILM

Parafilm M® is a semi-transparent, flexible thermoplastic. Many unique properties make it ideal and adaptable for numerous laboratory uses and techniques. It molds and seals tightly around test tubes, flasks and irregular surfaces. It is moisture-proof, impervious to aqueous solutions, and protects anhydrous materials.

When stretched, Parafilm M® increases lengthwise approximately 200%. Yet when tension is removed, film only partially returns to original length. The Dispenser/Cutter accommodates either 4" or 2" wide rolls, and a quick downward push cleanly cuts at the desired length.

Code 51355 Parafilm, 2-inch roll

Code 51356 Parafilm, 2-Inch, case of 24 rolls

Code 51357 Parafilm, 4-Inch roll

Code 51358 Parafilm, 4-Inch, case of 12 rolls

Code 51359 Parafilm Dispenser/Cutter

Portable Kleanfeat for Shoe Cover

The portable Kleanfeat unit provides a simple hygienic solution to the need for shoe covering in clean environments.

•	Contamination from outdoor shoes is eliminated
•	Back strain is reduced as there is no need to bend down
•	Balancing on one foot is eliminated
•	Overshoes are fitted rapidly and securely
•	The lightweight portable unit can be moved to different locations as required
•	Running costs are extremely low

The wearer simply places one foot into the unit; the Kleanfeat applies the overshoe within two seconds and reloads ready for the other foot. The Kleanfeat portable unit holds 50 overshoes and can be refilled within seconds.